BPGWY - 412, ULTRA VINYL SPRAY WHITE

  • MSDS: BPGWY
  • Manufacturer: PLASTI KOTE CO INC
  • Product Name: 412, ULTRA VINYL SPRAY WHITE
  • National Stock Number: 8010-00N031015
Product Identification

Product ID:412, ULTRA VINYL SPRAY WHITE
MSDS Date:11/06/1986
FSC:8010
NIIN:00N031015
MSDS Number: BPGWY

Responsible Party
PLASTI-KOTE CO INC
1000 LAKE RD
MEDINA, OH 44256
US

Emergency Phone: 216-725-4511

Info Phone: 216-725-4511

Cage: 07778

Contractor
TEMPO PRODUCTS CO A PLASTI-KOTE CO INC
MEDINA, OH 44256 US

Telephone: 330-725-4511

Cage: 07708

Ingredients

70 @ 20C

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 20-25%

OSHA PEL 200 PPM; 300 STEL

ACGIH TLV: 200 PPM; 300 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


186 @ 20C

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 30-35%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


2-PENTANONE, 4-HYDROXY-4-METHYL-; (DIACETONE ALCOHOL).

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: 10-15%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM


22 @ 20C

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5-10%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


5.1 @ 20C

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <5%

OSHA PEL 100 PPM; 150 STEL

ACGIH TLV: 100 PPM; 150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


-100F

RTECS: 9999999ZZ

Fraction By Weight: 19%


PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 19%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT


PROPANE, 2-METHYL-; (ISOBUTANE)

CAS: 75-28-5

RTECS: TZ4300000


BUTANE; (N-BUTANE)

CAS: 106-97-8

RTECS: EJ4200000

OSHA PEL 800 PPM

ACGIH TLV: 800 PPM


NON HAZARDOUS INGREDIENTS

Fraction By Weight: 10-12%


RESPIRATORY PROTECTION (TC23C OR EQUIVALENT) OR

RTECS: 9999999ZZ


WASH CLOTHING BEFORE REUSE.

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL:EXCESSIVE INHAL OF VAPS
CAN CAUSE NASAL & RESP IRRIT, DIZZ, WEAK, FATIGUE, NAUS, HDCH, POSS
UNCON & EVEN ASPHY. EYE:CAN CAUSE SEV IRRIT, REDNESS, TEARING &
BLURRED VISION. INGEST:CAN CAUS E GI IRRIT, NAUS, VOM & DIARR.
SKIN:CANCAUSE IRRIT FOR SOME PERS. CHRONIC: NONE KNOWN FOR PRODUCT.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:REPORTS HAVE ASSOC RPTD/PRLNGD OCCUP
OVEREXPOS TO SOLVENTS W/PERM BRAIN & NERVOUS SYSTEM DAMAGE. SEVERE
OVEREXPOS IN LAB ANIMALS HAS ALSO CAUSED LIVER ABNORM & DAMAGE TO
KIDNEYS, LUNGS & SPLE EN. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING & INHALING CONTENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:CAN CAUSE ALLERGIC RESPIRATORY &/OR
SKIN REACTION.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. IF BRTHG IS DFCLT, ADMIN O2. IF
BRTHG IS STOPPED, GIVE ARTF RESP & SEEK MD. EYES:FLUSH W/WATER FOR
AT LEAST 15 MINS WHILE OCCASNLY HOLDING EYELIDS OPEN. GET MD.
INGEST:DO NO T INDUCE VOM (ASPIR OF MATL INTO LUNGS CAN CAUSE CHEM
PNEUMONITIS, WHICH CAN BE FATAL). KEEP PERS WARM & QUIET & GET
MD/POIS CTL CTR. SKIN:WASH W/SOAP & WATER OR VARIOUS HAND CLEANERS.
(ING 12)

Fire Fighting

Flash Point:0F,-18C (ING 6)
Lower Limits:1%
Extinguishing Media:"ALCOHOL" FOAM, CO2 & DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFT; IT MAY BE USED TO COOL CLSD CONTRS TO
PVNT PRESS BUILDUP & POSS AUTO-(SUPP DATA)
Unusual Fire/Explosion Hazard:CLSD CONTRS MAY EXPLODE/AUTOIGNITE WHEN
EXPOSED TO EXTREME HEAT. VAPS ARE HVR THAN AIR & MAY TRAVEL ALONG
GROUND OR MAY BE MOVED BY VENT & IGNITED (SUPP DATA)

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. VENTILATE
AREA. ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABSORBENT OR OTHER
ABSORBENT MATERIAL & TRANSFER TO A CLOSED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE IN AREAS >120F, IN DIRECT
SUNLIGHT OR NEAR HEAT OR OPEN FLAMES. DO NOT PUNCTURE OR
INCINERATE.
Other Precautions:STORE LARGE QUANTITIES IN BUILDINGS PROTECTED FOR
STORAGE OF NEPA CLASS IC FLAMMABLE LIQUIDS.

Exposure Controls

Respiratory Protection:FOR CASUAL/OCCASIONAL USE: TO AVOID BRTHG VAPS/
SPRAY MIST, OPEN WINDOWS/DOORS OR USE OTHER MEANS TO ENSURE FRESH
AIR ENTRY DURING APPLICATN & DRYING. IF YOU EXPER EYE WATERING,
HDCH OR DIZZ, INCR FRE SH AIR, WEAR NIOSH/MSHA APPRVD (ING 11)
Ventilation:REGULAR/CONTINUOUS USE: PROVIDE SUFFICIENT MECH (GEN) &/OR
LOC EXHST VENT TO MAINTAIN EXPOS BELOW TLV'S IN INGRED SECT.
Protective Gloves:CHEM RESISTANT (NEOPRENE) GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WHERE SPECIAL OR UNUSUAL CONDITIONS EXIST,
THE EXPERT ASSISTANCE OF AN INDUSTRIAL HYGIENIST SHOULD BE SOUGHT.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM. AS
W/ ALL CHEMICALS, MINIMIZE PERSONAL CONTACT & BREATHING OF VAPORS.
Supplemental Safety and Health
EVAP RATE:SLOWER THAN ETHER (PROPELLANT FASTER); PRODS:>1 (PROP:<1) (BU
AC=1). FIRE FIGHT PROC:IGNIT/EXPLOS WHEN EXPOSED TO EXTREME HEAT.
IF WATER IS USED, FOG NOZZ ARE PREFERABLE. EXPLO HAZ:BY PILOT LTS,
OTHER FLAMES, SPARKS, HEATERS, SMKNG, ELEC MOTORS OR OTHER IGNIT
SOURCES AT LOCATIONS DISTANT FROM MATL HNDLG PT.

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:>133F,>56C
Melt/Freeze Pt:M.P/F.P Text:>1500F,>816
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:<1 (H2O=1)
Evaporation Rate & Reference:(SUPP DATA)
Solubility in Water:SLIGHT TO MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT.
Percent Volatiles by Volume:85-90

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS & HEAT.
Stability Condition to Avoid:HEAT, SPARKS & OPEN FLAME.
Hazardous Decomposition Products:MAY FORM TOXIC MATLS, CO2/CO, VARIOUS
HYDROCARBONS, NITROGEN COMPOUNDS, ETC, WHEN BURNED.

Disposal

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE
W/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.